Professional quality AIM Motorsport suspension potentiometer used to measure the displacement between two points using a sensor (linear potentiometer) directly connected to the points of measure. Suits all AIM loggers and dash display/loggers, this potentiometer can be used to measure linear displacements like: Suspensions and spring cushions compression or extension Steering column rotation measured through the rack displacement. Shock and suspension travel Ride height Wing or spoiler deflection at speedAs a very simple guide - most bikes use 150mm on the front fork, 75mm on the rear shock and 50mm for the steering damper whilst most cars use 100mm on both the front and rear suspension.Please note: Supplied as standard with a 30cm cable. To extend the length or connect directly to a MXL/MXL2/MX Series dash/EVO5 logger use with the (optional) 719-719 Extension Lead which is available in various lengths from 0.5 - 3 meters. If connecting to an EVO4S Data Logger or Channel Expansion, use a 712-719 Patch Lead.
